1. JINSE
#ad
JINSE Bipod,6.5-9 Inch Picatinny Bipod with CNC QD Lever Mount,Lightweight, Stable Design Adjustable Bipod 360 Degree Swivel
#adJINSE #ad - 12-month warranty we are dedicated to providing 100% customer satisfaction. If you have any issues or questions, let us know ASAP! Solid constructionDurable aluminum construction with stable rubberized stand.More information #ad
Qd lever mountbipod compatible with 20cm rail, can be mounted directly to Weaver / Picatinny rail. Extendable legsadjustable height with spring tension, 5 different heights from 6. 5''-9''. Pivot model provides 30 total degrees left to right,perfect for use in uneven terrains.Brand | JINSE #ad |
Manufacturer | JINSE #ad |
Height | 8 Inches |
Length | 8 Inches |
Weight | 0.88 Pounds |
Width | 3 Inches |
Part Number | 99E |
Model | 99E |
More information #ad
2. CVLIFE
#ad
CVLIFE Bipod Adapter Bipod Mount Sling Stud 4 T-Nuts 4 Screws and 1 Wrench
#adCVLIFE #ad - Comes with extra set of the screws and T-nuts for further using. Upgraded t-nuts design increases width to provide a sturdy support for bipod. Fits on rails and works with the most common bipods on the market, can also be used as a sling stud when bipod is removed.More information #ad
If you receive a defective item, feel free to contact us and we will send you a new one or 100% refund you. Manufacturing in high quality aluminum construction with black anodized finish. Enhanced sling stud won't strip off. Two convex blocks on both sides can resist much more recoil to provide a solid stability.Brand | CVLIFE #ad |
Manufacturer | Huihaozi #ad |
More information #ad
3. CVLIFE
#ad
CVLIFE 6-9 Inches Tactical Bipod Adjustable Spring Return with 360 Degree Swivel Picatinny Adapter
#adCVLIFE #ad - Loosing the bottom screw to swivel the top adapter, the adapter will be secured, you can adjust to any angle you want. When tighten the bottom screw, which provides you a steady support.Slightly pressing the button, you could adjust the length to meet different needs when hunting. Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.
More information #ad
High quality rubber on the bottom of the leg makes the bipods shockproof and antiskid. With the spring on both legs, you could fold the legs up easily and keeping silent when hunting. It can be adjusted from 6 inches 152mmto 9 inches225mm. 5 settings of leg length.Brand | CVLIFE #ad |
Manufacturer | Huihaozi #ad |
Height | 3.3 Inches |
Length | 7.3 Inches |
Width | 2 Inches |
Part Number | US03036 |
More information #ad
4. Magpul
#ad
M-LOK, Magpul Rifle Bipod, Black
#adMagpul #ad - Optimized for rapid one-handed adjustmentS; quickly and quietly transitions between countless user configurations. Spring-tension legs stow neatly forward and snap down and lock into place with ONE HAND; LEG EXTENSIONS slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents.Made of lightweight mil-spec hard anodized 6061 t-6 aluminum and injection-molded polymer; aesthetically pleasing, LOW-PROFILE DESIGN conceals its mechanisms and hardware, smoothly brushing off Snags and bumps.
More information #ad
An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Easily loaded with stabilizing forward tension without fear of failure or warping; at just over 11 oz. The magpul bipod is lighter than many pricIER BIPODS currently on the market.
Brand | Magpul #ad |
Manufacturer | Magpul Industries Corp #ad |
Weight | 0.68 Pounds |
Part Number | MAG933-BLK |
Model | MAGBP |
More information #ad
5. CVLIFE
#ad
CVLIFE 6-9 Inches Tactical Rifle Bipod Adjustable Spring Return with Adapter
#adCVLIFE #ad - Adjustable leg length: 5 settings for different length, the bipod is ready to meet your needs. Foldable arms with spring tension control. Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.More information #ad
With return springs and leg release button, the leg length can be adjusted from 6 inches 152mmto 9 inches225mm. Come with the mount adapter. Quickly attach to or detach from the rifle using existing swivel stud.Brand | CVLIFE #ad |
Manufacturer | Huihaozi #ad |
Height | 3.3 Inches |
Length | 7.3 Inches |
Width | 2 Inches |
Part Number | US03033 |
More information #ad
6. Magpul
#ad
Black, Magpul Rifle Bipod, 1913 Picatinny Rail
#adMagpul #ad - Spring-tension legs stow neatly forward and snap down and lock into place with ONE HAND; LEG EXTENSIONS slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents.Optimized for rapid one-handed adjustmentS; quickly and quietly transitions between countless user configurations. Easily loaded with stabilizing forward tension without fear of failure or warping; at just over 11 ounce, The Magpul bipod is LIGHTER THAN MANY PRICIER BIPODS currently on the market.
More information #ad
Made of lightweight mil-spec hard anodized 6061 t-6 aluminum and injection-molded polymer; aesthetically pleasing, LOW-PROFILE DESIGN conceals its mechanisms and hardware, smoothly brushing off Snags and bumps. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.
Brand | Magpul #ad |
Manufacturer | Magpul Industries Corp #ad |
Weight | 0.95 Pounds |
Part Number | MAG941-BLK |
Model | MAGBP |
More information #ad
7. JINSE
#ad
Stable Design Adjustable Bipod 360 Degree Swivel(Blue), JINSE Bipod,6.5-9 Inch Picatinny Bipod with CNC QD Lever Mount,Lightweight
#adJINSE #ad - Extendable legsadjustable height with spring tension, 5 different heights from 6. 5''-9''. Qd lever mountbipod compatible with 20cm rail, can be mounted directly to Weaver / Picatinny rail.More information #ad
Warranty service12-month warranty. If you have any problems, please contact us. Pivot model provides 30 total degrees left to right,perfect for use in uneven terrains. Solid constructionDurable aluminum construction with stable rubberized stand.Brand | JINSE #ad |
Manufacturer | JINSE #ad |
Length | 20 Centimeters |
Width | 10 Centimeters |
Part Number | 99EH |
Model | 99EH |
More information #ad
8. JINSE
#ad
JINSE Bipod,6.5-9 Inch Picatinny Bipod with CNC QD Lever Mount,Lightweight, Stable Design Adjustable Bipod 360 Degree SwivelRed
#adJINSE #ad - Pivot model provides 30 total degrees left to right,perfect for use in uneven terrains. Qd lever mountbipod compatible with 20cm rail, can be mounted directly to Weaver / Picatinny rail.More information #ad
Warranty service12-month warranty. If you have any problems, please contact us. Extendable legsadjustable height with spring tension, 5 different heights from 6. 5''-9''. Solid constructionDurable aluminum construction with stable rubberized stand.Brand | JINSE #ad |
Manufacturer | JINSE #ad |
Length | 20 Centimeters |
Width | 10 Centimeters |
Part Number | 99E |
Model | 99EH |
More information #ad
9. Magpul
#ad
Magpul Rifle Bipod, Sling Stud QD, Black
#adMagpul #ad - Adjustable friction knob for setting tilt and ease of movement; Individually adjustable leg lengths in 025 degrees of tilt about the longitudinal axis of rifle for a total of 50 degrees.More information #ad
5” increments for a total of 7 positions. High strength reinforced injected molded polymer, steel and Mil-Spec hard anodized 6061 T-6 aluminum construction; Uncle Mike’s-style sling stud on rear of mounting body. Sport type: Tactical & Military.Brand | Magpul #ad |
Manufacturer | Magpul Industries Corp. #ad |
Weight | 0.68 Pounds |
Part Number | MAG951-BLK |
Model | MAGBP |
Warranty | Limited |
More information #ad
10. WOLTIS LONJN
#ad
WOLTIS Rifle Bipod Outdoors CNC QD Tactical Picatinny Rail 4.75-9 inch Bipod Flat Adjustable Black
#adWOLTIS LONJN #ad - Locks securely in 4 different positions: stowed back, 90 degrees straight down, 45 degrees forward and stowed forward. 15° +/- of preloaded pan, 15° +/- of preloaded Cant. Qd locking level, adjustable tension - just push up on the lock lever when not mounted and the nut rises up out of the recess allowing you to finger turn it show in picture.More information #ad
4. 75" to 9. 0" height adjustment, hard anodized technique, T6061 aluminum, rubber feet for stability. Mounts to 20mm picatinny rail via included ADM 170-S Lever.Brand | WOLTIS LONJN #ad |
Manufacturer | WOLTIS #ad |
More information #ad