Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool

#ad
Kreg KMA2900 #ad - From the manufacturer: the kreg multi-mark is an incredibly Handy Multi-Purpose Marking And Measuring Tool, Perfect For A Wide Variety Of Household And Jobsite Applications. Features:, torpedo level, 3 scale configurations, Imperial And Metric Scale, Built-In 3/16" Reveal Gauge, Durable And Compact Design.

3/16-inch offset for door trim. Perfect for general layout. The multi-mark features three different scale configurations, and much more… whether you need to transfer a measurement for that last Ceramic Tile, Layout Some Mitered Corners, A Handy 3/16” Reveal Gauge, A Built-In Level, Or Just Straighten A Few Simple Picture Frames, The Multi-Mark Is The Only Tool You’Ll Need To Get The Job Done.

Kreg KMA2900 Multi-Mark Multi-Purpose Marking and Measuring Tool #ad - Cumulative scale for transferring measurements. Item is manufactured in United States. Wide variety of measuring and marking functions. From the manufacturer: The Kreg Multi-Mark is an incredibly handy multi-purpose marking. 3 unique scale positions. The multi-mark features three different scale configurations, a built-in level, a handy 3/16" reveal gauge.

More information about Kreg KMA2900 #ad

Kreg Tool Company KHI-SLIDE Drawer Slide Jig

#ad
Kreg KHI-SLIDE #ad - With this jig, you’ll know that your slides are positioned correctly, so your drawers will operate smoothly. Accurate slide positioning with built-in indexing tabs. All you need are the slides you’ll use, and the Drawer Slide Jig, a clamp, and you’re set to install drawer slides just like the pros.

The drawer slide jig consists of two brackets that clamp in place inside the cabinet—one on each cabinet side—and align with the cabinet face frame or with designated marks on frameless cabinets to support the drawer slide as you drill mounting holes. The slides have to be level, and positioned properly, straight, or the drawers won’t operate well.

Repeatable results without measuring and marking. This easy-to use jig holds slides in position as you drill mounting holes in the cabinet, and it supports drawer boxes while mounting slides to the drawer. Install drawer slides the fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly.

Kreg Tool Company KHI-SLIDE Drawer Slide Jig #ad - The jig supports the drawer slide level and straight while you install it in the cabinet. The drawer slide jig works with almost all types of drawer slides, including ball-bearing, epoxy-coated, and undermount slides. The drawer slide jig takes the guesswork out of the process by indexing with the cabinet frame or side on frameless cabinets for perfect alignment.

The drawer slide Jig takes the guesswork out of installing drawer slides.

More information about Kreg KHI-SLIDE #ad


Similar products



Square-Cut

#ad
Kreg KMA2600 #ad - Install drawer slides the fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly. Reversible to mount slides to cabinet and drawer box. Built-in roof pitch scale for cutting siding. Low-profile design won't interfere with saw. The square-cut™ allows you to quickly and accurately crosscut boards up to 12" 305mm wide.

Whether you’re using a circular saw or a jigsaw, the Square-Cut™ ensures great results. Versatile for use in cabinets, cases, and more. Just position the square-cut™ against the edge of your board and the built-in guide arm ensures that it sits perfectly square. Repeatable results without measuring and marking.

Square-Cut #ad - Accurate slide positioning with built-in indexing tabs. Adjustable arm requires no trimming. Supports work pieces up to 12-Inch wide. Switch back and forth between any circular or jig saw.

More information about Kreg KMA2600 #ad


Similar products



Kreg KHC-Premium Face Clamp

#ad
Kreg KHC-PREMIUM #ad - Switch back and forth between any circular or jig saw. Classic face clamps are designed for creating perfectly flush Kreg joints, and they work great for lots of other shop and project tasks that require solid clamping without marring. 3" reach 76mm; clamps materials up to 23/4" Thick 70mm. Built-in roof pitch scale for cutting siding.

Used primarily for securing individual joints while pocket-screws are being driven. Adjustable arm requires no trimming. When used in kreg joinery, the extra-large clamp face gets positioned on the “show” side of the joint. Features a 3" reach and clamps materials up to 23/4" Thick. Unique clamp designed specifically for pocket-screw joinery.

Kreg KHC-Premium Face Clamp #ad - Low-profile design won't interfere with saw. Accurate slide positioning with built-in indexing tabs. Repeatable results without measuring and marking. The large face of the clamp keeps the joint perfectly flush. Reversible to mount slides to cabinet and drawer box. Versatile for use in cabinets, cases, and more.

Supports work pieces up to 12-Inch wide.

More information about Kreg KHC-PREMIUM #ad


Similar products



Kreg Screw Selector Wheel 1 pk

#ad
Kreg Tool Co #ad - Built-in roof pitch scale for cutting siding. Works with 1/2-inch, 1-inch, 1-3/8-inch, 7/8-inch, 5/8-inch, 1-1/8-inch, 1-1/4-inch, 3/4-inch, 1-1/2-inch material. Compatible with kreg jig k3, K5, K4MS, K4, and R3. Durable. 5mm polypropylene construction. Accurate slide positioning with built-in indexing tabs. Unique clamp designed specifically for pocket-screw joinery.

Low-profile design won't interfere with saw. Reversible to mount slides to cabinet and drawer box. Switch back and forth between any circular or jig saw. Supports work pieces up to 12-Inch wide. The large face of the clamp keeps the joint perfectly flush. Install drawer slides the fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly.

Kreg Screw Selector Wheel 1 pk #ad - 3" reach 76mm; clamps materials up to 23/4" Thick 70mm. The screw selector wheel from Kreg allows the user to dial in the thickness of each woodworking piece to be joined. Versatile for use in cabinets, cases, and more. Tab with hole makes the Wheel easy to hang. Repeatable results without measuring and marking.

Adjustable arm requires no trimming.

More information about Kreg Tool Co #ad


Similar products



Kreg Tool Company KHI-PULL Cabinet Hardware Jig

#ad
Kreg KHI-PULL #ad - 3" reach 76mm; clamps materials up to 23/4" Thick 70mm. Supports work pieces up to 12-Inch wide. Durable polymer construction makes the jig tough but light, and hardened-steel drill guides ensure that you’ll get straight, a few, accurate holes— whether you’re drilling one, or hundreds. Accurate slide positioning with built-in indexing tabs.

Install drawer slides the fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly. The cabinet hardware jig features moveable, hardened-steel drill guides that lock in place to align with common hole-spacing measurements for cabinet knobs and pulls. Works with 1/2-inch, 1-1/8-inch, 7/8-inch, 1-inch, 1-3/8-inch, 1-1/4-inch, 5/8-inch, 3/4-inch, 1-1/2-inch material.

Kreg Tool Company KHI-PULL Cabinet Hardware Jig #ad - Compatible with kreg jig k3, K4MS, K5, K4, and R3. Durable. 5mm polypropylene construction. Adjustable edge guide for easy positioning . Versatile for mounting single and multi-hole knobs. Whether you’re installing one new knob or dozens of drawer pulls, the Jig ensures that you’ll drill accurately and consistently every time, so you get results that exceed your expectations.

Adjustable arm requires no trimming. All you need is a drill and a 3/16", bit, and the ability to set the jig to match your hardware and the position where you want it to go.

More information about Kreg KHI-PULL #ad


Similar products



KREG KMA3200 Shelf Pin Drilling Jig

#ad
Kreg KMA3200 #ad - Switch back and forth between any circular or jig saw. If you're adding shelf pin holes to an existing piece of furniture or building shelves from scratch, the Kreg Shelf Pin Jig is the perfect tool for the job. Adjustable edge guide for easy positioning . Install drawer slides the fast, Easy Way for Drawers That Fit Perfectly Every Time and Slide Smoothly.

Hardened steel drill guides ensure precise drilling. Versatile for mounting single and multi-hole knobs. Repeatable results without measuring and marking. The large face of the clamp keeps the joint perfectly flush. Tab with hole makes the Wheel easy to hang. This jig from kreg offers hardened steel drill guides to make sure you're on the mark every time.

KREG KMA3200 Shelf Pin Drilling Jig #ad - Supports work pieces up to 12-Inch wide. Built-in roof pitch scale for cutting siding. 3" reach 76mm; clamps materials up to 23/4" Thick 70mm. Low-profile design won't interfere with saw. Works with 1/2-inch, 1-inch, 5/8-inch, 1-1/8-inch, 3/4-inch, 7/8-inch, 1-1/4-inch, 1-3/8-inch, 1-1/2-inch material. Compatible with kreg jig k3, K4, K5, K4MS, and R3.

More information about Kreg KMA3200 #ad


Similar products



Rockler Clamp-It® Corner Clamping Jig

#ad
Rockler 58918 #ad - Connect multiple jigs together with the jig extender. Supports work pieces up to 12-Inch wide. A locating pin helps you quickly reference the same mark every time. The large face of the clamp keeps the joint perfectly flush. Works with 1/2-inch, 1-1/8-inch, 3/4-inch, 1-1/4-inch, 1-inch, 7/8-inch, 5/8-inch, 1-3/8-inch, 1-1/2-inch material.

Compatible with kreg jig k3, K5, K4, K4MS, and R3. Durable. 5mm polypropylene construction. Switch back and forth between any circular or jig saw. Low-profile design won't interfere with saw. This jig from kreg offers hardened steel drill guides to make sure you're on the mark every time. Adjustable guides for accurate hole placement.

Rockler Clamp-It® Corner Clamping Jig #ad - Locating pin lets you quickly reference last hole drilled. 3" reach 76mm; clamps materials up to 23/4" Thick 70mm. Reversible to mount slides to cabinet and drawer box. Versatile for mounting single and multi-hole knobs. Tab with hole makes the Wheel easy to hang. Built-in roof pitch scale for cutting siding. Includes shelf-pin jig, jig extender, depth collar, instruction manual, locating pin, allen wrench, 1/4-Inch drill bit, and four 1/4-Inch shelf pins.

More information about Rockler 58918 #ad


Similar products



Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes

#ad
Kreg SK03 #ad - Locating pin lets you quickly reference last hole drilled. Includes self-tapping screw sizes for pocket-screw joinery. Built-in roof pitch scale for cutting siding. Built-in measuring scales for repeatable results . Accurate slide positioning with built-in indexing tabs. Install knobs and pulls the Worry-Free Way - with Easy, Repeatable Accuracy.

3" reach 76mm; clamps materials up to 23/4" Thick 70mm. 2 square drive. Tab with hole makes the Wheel easy to hang. Adjustable arm requires no trimming. A locating pin helps you quickly reference the same mark every time. Adjustable guides for accurate hole placement. Includes shelf-pin jig, depth collar, allen wrench, 1/4-Inch drill bit, instruction manual, locating pin, jig extender, and four 1/4-Inch shelf pins.

Kreg SK03 Pocket-Hole Screw Kit in 5 Sizes #ad - Dual position and adjustable 1-inch and 2-inch fence with standard hole spacing of 32 mm and a standard hole size of 1/4-Inch also sold separately 5 mm hole size. Reversible to mount slides to cabinet and drawer box. Includes a durable easy-to-carry case. Connect multiple jigs together with the jig extender.

More information about Kreg SK03 #ad


Similar products



Drawer Slide Jig with Cabinet Hardware Jig with Concealed Hinge Jig and Two 2" Face Clamps - Kreg Tool Company

#ad
Kreg #ad - These clamps feature large clamp pads that distribute clamping force evenly and hold pieces flush during assembly. Locating pin lets you quickly reference last hole drilled. Supports work pieces up to 12-Inch wide. Versatile for mounting single and multi-hole knobs. Includes a a needlepoint self-tapping tip. Firmly holds panels at a precise right angle, freeing up your hands so you can drive fasteners.

Contains 675 of 5 most used screws. Three easy-to-use Jigs plus 2 bonus Clamps in one specially-priced kit. The jig positions an included carbide-tipped bit exactly at the proper position and offset, and drills to the perfect depth every time thanks to a depth stop collar. Cabinet hardware jig-khi-pullthe Kreg Cabinet Hardware Jig takes the guesswork out of installing cabinet knobs and pulls.

Drawer Slide Jig with Cabinet Hardware Jig with Concealed Hinge Jig and Two 2" Face Clamps - Kreg Tool Company #ad - The movable edge guide and measuring scales make it easy to position knobs precisely, while adjustable drill guides ensure straight holes for perfect knob and pull positioning every time. Drawer slide jig-khi-slidethe Drawer Slide Jig takes the guesswork out of installing drawer slides. Hardware installation kit: three easy-to-use jigs plus two bonus Clamps in one specially-priced kit.

The concealed hinge jig allows you to drill cup holes for concealed cabinet door hinges using just a drill. Adjustable edge guide for easy positioning .

More information about Kreg #ad


Similar products



Calculated Industries 8510 Home ProjectCalc Do-It-Yourselfers Feet-Inch-Fraction Project Calculator | Dedicated Material Keys For Estimating Material Quantities and Costs For Home Handymen and Diys

#ad
Calculated Industries 8510 #ad - Firmly holds panels at a precise right angle, freeing up your hands so you can drive fasteners. Contains 675 of 5 most used screws. Hardware installation kit: three easy-to-use jigs plus two bonus Clamps in one specially-priced kit. Comes complete with hard cover, easy-to-follow user's guide, long-life battery and 1-year warranty.

You know that getting what you need The first time at the home improvement Center saves you time, money and frustration. Adjustable guides for accurate hole placement. Enter measurements as you say them directly in feet, fractions, decimal fractions, inches, yards and meters, including square areas and cubic volumes; one key instantly converts your measurements into all standard Imperial or metric Math dimensions that work best for you and the project you are working on.

Calculated Industries 8510 Home ProjectCalc Do-It-Yourselfers Feet-Inch-Fraction Project Calculator | Dedicated Material Keys For Estimating Material Quantities and Costs For Home Handymen and Diys #ad - Dedicated building function keys make determining Your project needs Easy; just input project measurements, Select material type Like wallpaper, paint or tile; then calculate the quantity needed and total costs To avoid nasty surprises at the homecenter checkout. Install knobs and pulls the Worry-Free Way - with Easy, Repeatable Accuracy.

Connect multiple jigs together with the jig extender. Hardened steel drill guides ensure precise drilling. Adjustable edge guide for easy positioning . The perfect drill guide for shelving, whether you're building from scratch or adding to existing furniture.

More information about Calculated Industries 8510 #ad


Similar products